PART 1
Pyramids of Light

There is much information on the
Internet related to pyramids. In ancient times, they were made of rocks and in
modern times their energetic characteristics have been broadly studied through radiesthetic exams. The results of this research are
available on the Internet in different lines of work.
The pyramidal form has
many impressive benefits both for health and spiritual, and it is a great
privilege to have one of these sacred forms in our homes and especially in our
rooms, covering our beds. Thus, as we sleep, we are
nurtured by the great amount of vital energy that is concentrated inside it.

There are pyramids made of various
materials, namely metal, wood, or plastic. There are even constructions or buildings
that have this form, and it is increasingly common to find people who
understand and use this form to their benefit.

In these pages, we will show how we
can make pyramids that are invisible to the normal eye, but which clairvoyantly
appear as objects at the energy level. This is a very important novelty for
those who are already familiar with the power of pyramids in general, because
with these techniques we can make some as great as the ones in Egypt, without
requiring the huge work of transporting and gathering materials, by using only
very simple techniques.
How to make Pyramids of Light?

To make a Pyramid of
Light we need lines of energy that unite around a common point to create the
form of a pyramid. We only need the lines, as the planes that form the faces of
a pyramid are automatically generated from the lines and the effect is the
same.

We could use metal or
plastic tubes, as is commonly done, but our body would bump into the lines when
crossing them, so it is not convenient to place a pyramid of sticks or tubes in
our rooms. Also, because of the cost, we would not put a pyramid of metal tubes
covering our house.

Imagine that it is possible to have
lines of energy, which like tubes of light would serve to create a pyramid. Lines that we could stretch and that could be crossed by our
physical bodies without having space constraints.

This technique is very simple, and
with each step we will prove the existence of a flux of cosmic
energy or
LIGHT, that will be used indistinctly both to make the necessary lines and to
generate the walls of our pyramid. At the end, this same cosmic energy will be
accumulated in the pyramid created and will act as a giant transformer that
will capture and decelerate the energy that travels at incommensurable speeds,
concentrating it so that we can use it as bioenergy
or spiraled energy to generate life.
How to make a line of LIGHT or cosmic energy?
We will make a line using
omnipresent universal energy in a simple way.
Let us use the form of a common
corner like the one seen in most modern constructions.

If we correctly examine the form of
a corner, we will see that there is a pyramid there. In fact, this pyramid is
formed by the three walls that unite in ninety-degree angles. In the pictures
below, we can see from another perspective a glass corner with an equilateral
triangle installed to generate a very special phenomenon.

The pyramids act as funnels and
spiral the universal energy that is absorbed by the base and sent out through
the tip in the form of a spiral wave of magnetic characteristics.
.

This is the reason why most square
rooms end up with not enough vitality to support life, as they lose all the
energy from inside that escapes through the tips in constructions with this
format.
What is the solution for the escape of vital energy through the square
corners?
It is very simple and with
surprising results.
If we install a cover, by putting an
equilateral triangle in the vertex of corners, we will stop this subtle flow
from escaping through the corners.

The size of the equilateral
triangles must be correspondent to the human body, so the vibration emitted can
be perceptible by our bioenergetic systems. Thus, the
side of each triangle can vary from some 10cm to 15cm, which is more than
sufficient to produce an effect that we can feel with our own bodies. That is
because our entire organism is built based on fractal geometrical proportions,
thus the size of the triangle will be equivalent to the triangle formed by our
hands.

It is fascinating that this flux
returns as a reflex and is capable of creating a line of force due to the
perfect balance in the equal pressure by the similar forms of corners and thus
the more perfect the equilateral triangle, the better.

Using various lines of force of this
type, we can build large pyramidal forms, with properties that are equal and
better than those of stone and other materials that have been built for a very
long time.

Manually proving the existence of universal energy
There is a very simple way to prove
that there is vital energy supporting the entire universe and that this energy
behaves like a fluid that goes from here to there, being absorbed and expelled
by all bodies.

This energy is channeled in
different ways by the molecular geometry of bodies, producing movement. This
energy is what gives us life and it is channeled by the fractal geometry that
organizes our molecules and organs producing various effects.

For this experiment, we will rub the
palms of our hands together and put one palm toward a selected corner. The
corner should be perfect and with continuous planes so that it can give us the
expected result.

Let us concentrate to feel the
energy... in less than ten seconds we will see that we don’t feel anything
except our own hand palpitating.
This is because the energy is
following a flow toward the corner and leaving through the tip.
The abundant energy rebounds off the
walls and by the pressure caused by the accumulation, leaves through the tip.
We will now dedicate some minutes to
glue an equilateral triangle of any material except metals to the corner. It
can be made of glass, acrylic, plastic, wood, cardboard, etc. What is important
is the form of a perfect equilateral triangle.

This process should be done in
silence, attentive to the energy in our bodies, simply observing, without any
intention, opening to the sensation. This attention activates our senses.
The surface of the equilateral
triangle must be perfectly flat and should be glued adequately with the other
planes that form the corner.
For example, if we use glass glued
with silicon, we should use our fingers to even out the silicon and stick the
triangle to one of the walls as if it were a single surface.
If we are using cardboard, we can
glue the triangle with scotch tape to guarantee that it is well sealed to the
wall.
After this operation, we place one
of our hands toward the triangle, preferably with our fingers together, about
15 to 20 cm away, and in this position we should try to “feel”…
Can you feel the difference now?
Some can feel it not only with their
hands, but the energy reflected makes the entire body vibrate, especially the
chest. If you didn’t feel anything when conducting this experiment, try it
again in fasting, drinking a lot of water, to increase the electric
conductivity of the best sensitive equipment, which is your own body.

The flux that is felt heats the hand
and can even charge us with energy, because what we are feeling is a flux that
was always there, impregnating and surrounding us, in such an imperceptible way
that for many it never existed, although it is precisely what gives us life, it
is this very energy that animates our body.

The geometric form of corners
channels this vital cosmic flow and expels it out of rooms and is generally
absorbed by metals of beams in buildings and returns to earth to continue with
the continuous channeling cycle.
The square form is the most economic
to build because it allows creating environments quickly and using one beside
the other.

If we observe the form of water
crystals, we can see that there is little resonance or resemblance with the
square form of our rooms and constructions.

How to build a pyramid of light in our room?
This is quite easy to do if we can
already create a line of force. We must only identify four, five or six corners
that are proportionally separated and that can generate a square-based or
hexagonal pyramid.



Since most of our rooms are built in
a square format, we will prefer a pyramid like those in

If we observe our room, we can
easily identify the corners, and with luck, we will have four corners
available, or we will have to create an artifice for some of them.

In an ideal situation, we will have
the four corners clear, without baseboards, and it will suffice to glue an
equilateral triangle of the material available to generate the pyramid of light,
whose base will be the floor between the corners.

We can enjoy the process of
installing the corners. When we install the first one, we can put our hand out
to feel how the energy is reflected.
With one corner, the energy is
reflected, but returns to the same corner, in a loop.
With the second corner, immediately
the two lines of energy attract each other magnetically and unite like two
lines in an unstable point.

With the third corner activated, a
pyramid of light is formed, with the base of a rectangular triangle, and depending
on the zone in which we live, we can feel that this
generates a subtle cool.

With the fourth corner activated,
placing the equilateral triangle, THE PYRAMID OF LIGHT IS INSTANTANEOUSLY
FORMED, invisible to the normal eye. In the figure, the violet corners
represent the corners in which the equilateral triangles are formed in a room.
The pyramid is generated from the four corners at the base, from which the
lines formed come from and meet by magnetic attraction.

The vertex or the point of union of
the lines of force is displaced and is centered right at the middle of the four
corners, thus this point is movable depending on the position of the corners,
and changes with the placement of the equilateral triangles.

Changing the height of our Pyramid of Light
This technique can only be applied
to the pyramids of light generated by corners especially prepared for this
objective.

The four corners adapted to generate
the pyramid of light are portable and thus the base can be elevated slightly so
the lines of force can project and unite at a greater height.

This possibility is especially
useful if we want to cover a house of two or three stories. The pyramid of
light with the corners supported on the floor may hit the walls of the house
and the vertex will project to the interior of one of the rooms in the middle.

Directing the triangle to the center
of the field and with the corresponding tip slightly raised, we can create a
higher pyramid, which unites above the construction.
Many people have studied the
properties of pyramids and have made experiments with small models, putting
food inside to conserve and others even larger models in which it is possible
to enter with part or the entire body to feel its effect. With this, they
proved that there are special energy phenomena that deserve greater attention
and study.

Many people are delighted with the
form of pyramids and have decided to live in houses built especially with this
form. However, this format is more expensive to build and the space available
is very small, because the area of the architectural pyramid is reduced as you
move toward the tip.


There are even constructions with
the form of an inverted pyramid, and it also has properties that differ
depending on where the energy comes from.

With this Technique of Light, we can
now build a pyramid for our room or to cover our entire house, using the
architecture based on squares, simply installing equilateral triangles in the
appropriate corners. This pyramid will be invisible to the normal eye, but its
effects will be clear both to adjust the inner temperature and with the
vibration that will work on us and that we will possibly feel like a slight
tingling in some part of our body.